BR100
32-bit lift control mainboard — up to 32 stops over serial CAN, EN 81-20/50 certified, with shaft-reading options, USB firmware update and MoviControl remote monitoring.
- 32
- Max floors
- EN 81-20/50
- Certified
- 13
- Manoeuvre types
- 100
- Stored faults
Overview
The main board that runs a Movilift elevator controller — manages calls, positioning, doors, the safety chain and manoeuvre logic for up to 32 stops.
The BR100 is Movilift's 32-bit control mainboard for machine-room and MRL passenger lifts, engineered and produced in-house in Italy. It runs the complete manoeuvre — calls, positioning, doors, the safety chain and drive control — for up to 32 stops over a serial CAN bus, with the full Movilift manoeuvre set from simplex collective to duplex/triplex/quadruplex dispatch, plus firefighters, hospital and Shabbat modes.
Certified to EN 81-20:2020 and EN 81-50:2020, it integrates a 12 V battery charger, a 2 A stabilized supply and safety-chain monitoring, reads the shaft by magnetic switches, digital encoder or absolute magnetic tape, and stores the last 100 diagnostic events. It manages up to 2 door operators, is programmed from the removable on-board keypad or an RS232 PC tool, updated over USB, and can be monitored remotely through the MoviControl WebApp over GSM.
Specifications
| Dimensions | 125 × 280 mm |
|---|---|
| Weight | 380 g |
| Processor | 32-bit MCU (embedded firmware) |
| Supply voltage | 14–24 VDC/AC ±10% |
| Stabilized output | 12 VDC, 2000 mA |
| Battery charger | 13.8 VDC, 400 mA |
| Safety-chain input | 24–110 VAC/DC |
| Transistor output | 200 mA |
| Max stops | 32 full collective / 24 down collective (serial CAN) |
| Door operators | Up to 2 |
| CAN protocol | Movilift proprietary, DS301 CANopen |
| Shaft reading | Magnetic switches, digital encoder or absolute magnetic tape |
| Programming | Removable on-board keypad; RS232 PC tool (9600 8N1) |
| Firmware update | USB |
| Remote control | MoviControl WebApp (GSM) |
| Stored faults | 100 |
| Compliance | EN 81-20:2020 / EN 81-50:2020 |
| Operating temperature | 0 °C to +70 °C |
Compatibility
Mainboard for the Movilift controller range, in the same BR family as the BR50L, BR200 and BR400. Manages up to 32 stops in full collective over the proprietary serial CAN bus (DS301 CANopen), expandable with COP/LOP boards, or up to 24 via CHM wiring expansion. Connects to Movilift displays (Marlin family) and pushbuttons over CAN, drives VVVF inverters, and supports up to 2 door operators and 16 floors with selective access. Remote monitoring via the MoviControl WebApp (GSM).